What to Examine if Your Hot Water Service is Not Functioning
What to Examine if Your Hot Water Service is Not Functioning
Blog Article
Are you currently hunting for insight around How to Troubleshoot and Repair an Electric Water Heater?
Several modern-day residences use an electric water heater for their heating system, due to its ease and also convenience of use. Nevertheless, much like any other electrical appliances, troubles might develop with its usage, unexpectedly. It can be really irritating to awaken to a chilly shower instead of a hot one or having your bathroom with water that isn't warm sufficient or even also hot. Whatever the case might be, water heater problems can be rather nerve-racking. The good news is, we have actually made a list of feasible services to your water heater problems. There are a number of variables that could trigger a lot of these problems, maybe a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, ensure you turn off the major power supply for security. Whatever the problem is, getting it dealt with must not posture excessive of an issue if you adhere to these steps:
Call A Specialist:
If after changing all faulty components as well as resetting your temperature level, the hot water heater still isn't working, you might need to speak to an expert plumber for a specialist opinion. The issue with your heater could be that the hot and cold faucets have been changed or it may be undersized for the amount of warm water needed in your house. Whatever the case may be, a professional plumber would certainly help address the problem.
Examine Your Power Supply:
As basic as this might seem, it is extremely necessary. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the problem, just transform it off and on once again. Change any type of busted or worn-out fuse. Check the device with power after these changes to see if it's currently working.
Inspect Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't warm enough, you may require to examine the temperature setups on your top thermostat. Guarantee the breaker is turned off before doing anything. Open the accessibility panel and press the red button for temperature level reset over the thermostat. This ought to assist warm the water. Turn the circuit breaker back on and also check if the problem has actually been settled.
Check the Heating Element in the Hot Water Heater:
If it's not a power trouble, then try taking a look at your burner if it is still working. Test each of your heating elements to ensure the trouble isn't with any of them. If any of them is defective, change that component and afterwards check whether the hot water is back on.
Final thought
Hot water heater troubles are not constantly major. A lot of them are due to minor problems like a blown fuse or damaged burner. Replacing the defective components need to do the trick. Nevertheless, if you are still not able to address the problem, give a call to your closest plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a passionate person who reads about What Would Cause My Electric Water Heater to Stop Working?, I imagined sharing that piece of content was a good thing. Feel free to take a moment to share this page if you appreciated it. Kudos for your time. Visit us again soon.
Book My Estimate
Report this page